Android Hardbricked or softbricked, see the difference and possibly fix it

For a while now I have come across people with bricked device and even received calls about their bricked devices and ways they can unbrick it, they tend to forget that while we are busy trying to tweak and beautify our devices, the heavy price we have to pay if we are not careful is ending up with a bricked device.
I advice us to always backup our device before we try to switch between Roms, you will see guide here on how to backup your device before flashing Roms
First I'll talk about the differentiate between soft brick and hard brick and then we try possible methods to  hardbricking the device,
This is not possible in all case but Don't be scared, you have 1/10 chance of running into such problem,so seat back and and enjoy

Softbricked phone and how to fix 

If your phone is softbricked, in some cases you should be able to boot into your recovery mode, but you should be stocked at the new animation

Solution
whenever you encounter such problem as mentioned above, you have to download and flash a Rom on your device.
You can choose to do this without a PC, see full guide here

Another situation may be that you are not able to boot into your custom/stock recovery,
Solution
In this case you have to use the Smart Phone flashing tools like:
• SP FLASH TOOL (for MTK chipsets
• ODIN (for Samsung devices)
• Mi flash tool (for Xiaomis)
etc for flashing. So if the drivers are properly installed on the system which you are using then it will be able to detect your device in the "device manager" section on Windows.

Hardbrick phone and possible solutions

This stage is when the device has gone through problematic conditions such that it quits the detection of USB, charging and everything that you provide to it then the device is unfortunately hard bricked. Some hard bricked devices are as good as a paper weight that we paid for some day. But that is the extreme case lets see what are the two stages we can observe here:

Stage one: At stage one the device keeps getting disconnected every 5-8 seconds when you connect it with the flash tool via data cable (specially with the mtk devices I have seen). So in that cases we only have few seconds of time gap so that we can make the flash tool to detect the device.
Solution
 we have to find out certain key combos on the device which will lead to detection of your bricked device to flash the "stock ROM" while it kept connected to the data cable. Key combos could be:

-Volume Up + Power button

-Volume Down + Power button

-Volume Up + Volume Down

-Power button alone

Another way we observe a Hardbricked phone is when some serious hardware damage happened to the device such as malfunctioning of the motherboard, Processors, Internal circuits etc
Solution
 If the device reaches to this condition then it does needs repair on the segment of the hardware. In case if the device is under warranty then I recommend not to break the seal of the company or else the warranty will get void.
Always Remember To Use The Share Buttons,Sharing Is Caring

NEW: Receive our updates directly to your phone now SMSfollow tricksbar to 40404to start Now!!!(SMS is Free)