How To Allow Only Selected Device To Connect To Wi-Fi Network
Today almost 3 out of 5 people is having their personal Wi-Fi network at their home and workplaces. There are countless people who steadily tries to use others Wi-Fi networks, by cracking their key or by any other method. So, we have a cool trick by which you can individually allow your personal device to connect to your Wi-Fi network. So have a look on complete method below to proceed.
With this method you will be allowing only your personal devices to be connected to your Wi-Fi network and all another device will not get connected to the Wi-Fi network although if they have the password too. So just follow some simple steps below to proceed.
Steps To Allow Selected Devices To Get Connect On Wi-Fi:
Step 1: First of all, you need to connect your PC to Wi-Fi network where you want to implement this. Now in your Web browser, enter the router's IP address, that will be either http://192.168.0.1 or http://192.168.1.1 by default or you can get it by entering an ipconfig command in CMD.
Step 1: First of all, you need to connect your PC to Wi-Fi network where you want to implement this. Now in your Web browser, enter the router's IP address, that will be either http://192.168.0.1 or http://192.168.1.1 by default or you can get it by entering an ipconfig command in CMD.
Step 2: Now enter the username and password of your router connection there.
Step 3: Now there in router settings go to Advanced > Wireless Settings. Now there click on Setup Access List to open the Wireless Card Access List.
Step 4: Now click on add button to add the device to connect to Wi-Fi. Now you will be entering the MAC address and name of a device that you want to allow on that network.
Step 5: You can get the MAC address of your Android in About Phone in Settings. And in PC, you can find it in by entering config/all in CMD and note down the Physical address.
Step 6: Check the Turn Access Control TO "Allow".
That's all! you are done, Now only the selected device will be allowed to connect to the Wi-Fi network.
So above is all about Allow Only Selected Device To Connect On Your Wi-Fi. With this, you can secure your Wi-Fi network from others. And can save lots of bandwidths that will get divided when other persons access your Wi-Fi network. So implement this MAC Filter process today. Hope you like this cool post, do share it with others too using the share buttons above. Leave a comment below if you have any related queries.
Always Remember To Use The Share Buttons,Sharing Is Caring
How To Allow Only Selected Device To Connect To Wi-Fi Network
Reviewed by TricksBar
on
May 09, 2016
Rating:
Post a Comment